Amd Stock Cooler Installation

How to Install AMD Ryzen AM5 Stock Cooler Wraith Stealth Prism RGB

Step-by-Step Guide

Prerequisites

* Make sure your CPU is properly installed in the CPU socket. * Ensure the socket and CPU are clean.

Installation Process

1. Open the lever on the CPU cooler by pushing it down and rotating it 90 degrees. 2. Align the cooler with the CPU socket and carefully lower it onto the CPU. 3. Rotate the lever back up to 90 degrees to lock the cooler in place.

Fan Connection

1. Locate the CPU fan header on your motherboard. Refer to the motherboard manual if needed. 2. Connect the fan power lead to the CPU fan header.

RGB Connection (Optional)

If your cooler has RGB, connect the RGB header to the appropriate header on your motherboard.

Conclusion

Installing the AMD Ryzen AM5 stock cooler is a quick and straightforward process. By following these steps, you can ensure that your CPU is properly cooled, allowing it to perform at its best. Remember to handle the CPU and cooler with care to avoid damage.